The LABOCORD 3000 is a recently developed UV/Vis HPLC spectrophotometer
for routine use. It combines the attractive and functional Labomatic
design with high-performance photometer technology. Its specifications,
robustness and high flexibility are impressive.
Special features
-
Large number of measuring cells available
-
Preparative measuring cells with layer thicknesses up to 0.05
mm
The LABOCORD-100 differential refractometer
is used to measure refractive index differences between solvents
and solutions with low concentrations. The LABOCORD-100 is particularly
suitable for preparative liquid chromatography (LABOPREP-MPLC,
LABOPREP-HPLC).
Special features
-
Flowrate up to 570 ml/min
-
Good signal to noise ratio
-
Wide dynamic measuring range
-
Small flow cell volume
-
High sensitivity
-
Easily replaceable flow cell (for analytical or preparative
measurement)
-
Thermostatting only required for high sensitivity ranges
-
No replacement of parts at different refractive index ranges
The LABODIV-10 peak detector is used for automated fraction
collection according to peaks. The non-peak may be drained off
so that no test tubes are wasted for irrelevant buffer solution
and solvent collection. Allows solvent recycling.
-
The LABODIV-10 is particularly suitable for preparative high-performance
liquid chromatography (LABOPREP-MPLC, LABOPREP-HPLC).
Special features
-
Peak collection and draining off or recycling of irrelevant
non-peak eluate by threshold programming.
-
No unnecessary use of test tubes.
-
Unaffected by interference peaks through adjustable delay
of response time.
