 |
|
|
|
Specifications
(PDF)
|
|
|
| LABOMATIC HPLC valve and column
system panel |
HPLC |
|
|
|
|
| Application |
|
| - |
The LABOMATIC HPLC valve and column system control panel is
used for mounting instrument components such as the LABOMATIC
HD-3000 pump, the LABOCORD-3000 UV/VIS spectrophotometer and
up to 8 system valve switches and several HPLC columns.
The design is flexible: the different valves can be mounted
on exchangeable subpanels and autosampler components such as
spray pumps and rinse pumps can also be installed.
Up to four 5-liter storage bottles can be connected in the stainless
steel tub. These can be monitored by a leak sensor if required.
There are also optional filling level sensors available for
monitoring the solvent level.
All suction tubes and stainless capillaries can be installed
on this housing.
There are mounting rails on both sides of the panel which can
be used to mount other system components as required. All panel
elements are made of solvent-resistant materials and a spray
wall behind the equipment protects the instruments and unit
from external influences. |
|
|
| Special features |
|
| - |
For all instrument elements |
|
|
| - |
Incorporation of up to 8 system control valves such as sample
injection valve, column reversed flush valve, column change-over
valves, etc |
|
|
| - |
Installation possibility of several HPLC columns |
|
|
| - |
Mounting of further system elements on both sides |
|
|
| - |
Mounting of autosampler devices such as spray pump and rinse
pump |
|
|
| - |
Installation of gradient components such as mixing chamber
and valves or other sample injection systems, etc.
Guiding shaft for the electrical and pneumatic control of the
valves |
|
|
| - |
Made of stainless steel |
|
| - |
Safety draining racks made of stainless steel |
|
|
|
Specifications
(PDF)
|
|
|
LABOMATIC MPLC
system control panel |
MPLC |
|
|
|
|
| Application |
|
| - |
This system control panel is for the placement of several
LABOPORT MPLC system control valves, for the mixing chamber
during gradient chromatography, vacuum suction set, sample loops
and Labomatic vials. |
|
|
|
Specifications
(PDF)
|
|
|
| LABOMATIC system trolley |
HPLC |
|
|
|
|
| Application |
|
| - |
A system trolley produced to customer specifications for housing
a complete MPLC or HPLC system including the required chromatography
columns. |
|
|
| Special features |
|
| - |
Dimensions and design according to customer requirements |
|
|
| - |
Mobile |
|
|
| - |
Adjustable trays |
|
|
| - |
Plug board on the rear side for central current supply to
all individual components |
|
|
| - |
Stands for mounting of columns, etc |
|
|
| - |
Stainless steel safety draining racks with optional leak sensor |
|
|
|
|
Specifications
(PDF)
|
|
|
|
|
|
LABOMATIC exhaust system trolley
|
HPLC/MPLC |
|
|
|
|
| Application |
|
| - |
The exhaust trolley is produced to customer requirements and
used to house a complete MPLC or HPLC system including the required
chromatography columns. Normed upper and lower air vents ensure
optimal ventilation and safety. On the two bases stainless steel
tubs are installed to collect possible leakage. These tubs can
also be fitted with leak sensors. There are two models available:
One model is with stainless steel covers and sliding windows
made of safety glass. The other model has covers and sliding
windows made of polycarbonate. |
|
|
| Special features |
|
| - |
Dimensions and design according to customer requirements |
|
|
| - |
Mobile |
|
|
| - |
Separate air vents in the upper and lower parts |
|
|
| - |
Available in stainless steel with 4 sliding windows made of
safety glass |
|
|
| - |
Available in polycarbonate |
|
|
| - |
Stainless steel safety tubs with leak sensors |
|
|
| - |
Stands for fixing different components such as valves, columns,
etc. |
|
|
| - |
System can be extended |
|
|
|
|
Specifications
(PDF)
|
|
|
|
|
|
| LABOMATIC basic housing/computer housing |
|
|
|
|
|
| Application |
|
| - |
This housing accommodates the LABOMATIC
BR-100 or BR-200 recorder and can also be used to house a computer
with its keyboard. Thanks to the pull-out shelf, the keyboard
or the recorder are freely accessible or can be stored if necessary.
At the rear there is a 6-fold plug board with central current
supply to all individual components. |
|
|
|
